Bertian
STERILWAVE is a safe solution, suitable for integration in health facilities, without risk for staff. The treatment of grinding and sterilization of infectious waste is carried out in the same tank, without intermediate handling thus without risk for the operator. In addition, the STERILWAVE process trivializes waste at 100-110 ° C without any pressure in the tank. The process is therefore very safe compared to autoclave technologies that operate under 3, 4 bars of pressure, which imposes additional safety constraints, vigilance and training of operators.
YES
Metallic waste such as implants or needles is absolutely not a problem and can be ground and treated by STERILWAVE. It will be finely ground and become totally unrecognizable. In relation with the biggest waste dimension could be found deformed in the chamber after the treatment cycle by the rotative blace (blade made with very tough steel) in order to optimize equipment efficiency, Original Equipment Manufacturers recommend that large size metallic waste should not be disposed of in infectious hazardous waste bags.
YES
Based on microwave technology, our concept makes it possible to heat the ground waste more quickly, thoroughly and efficiently than autoclaving systems. Moreover, the various test reports we have made in independent laboratories have all resulted in microbial inactivation up to 8log10. Please note that these results all exceed the requirements of standard NF X30-503 and are above or equal to the results with autoclaving systems.
YES
Local treatment of infectious waste is cost efficient, safe and eco-friendly.
Cost effective
• No specific carrier required to transfer the infectious waste (less expensive).
• As soon as the STERILWAVE cycle is complete, the treated waste can be transferred to the standard onsite municipall waste collection point.
• Volume reduction after treatment: 80%.
• Weight reduction after treatment: 25%.
• Thanks to its low running costs, STERILWAVE is one of the most cost effective solutions on the market.
Safe solution
• Less intermediate handling. Eliminates the risk of personnel exposure.
• Eliminates the need to store infectious waste onsite until collection.
• Infectious waste is dealt with as it is produced.
Eco-Friendly
• Makes onsite treatment possible
• Eliminates frequent and polluting transport of waste containers that are often up to 80% empty
• Transforms hazardous waste into unrecognizable (finely-ground) municipal waste which can be reused as fuel (eg: cement plant kiln)
• No liquid effluents. No hazardous emissions
• Requires only a 400 V 3-phase 50 A electrical power supply
GoldShield
YES
An extensive list of bacteria and viruses against which Goldshield products are effective is available upon request.
YES
GS75 has been approved in the EU for its effectiveness against SARS CoV2 – the virus that causes COVID19.
Think of applying Goldshield like using an invisible shield that will bond to any surface or textile for ultimate protection.
Most surfaces have undetected tension (the molecules stick together in a way that creates a “solid” surface). Goldshield has a compound that eliminates that tension so the balance of the formula can bond to surfaces so that it actually becomes part of the surface.
The nano-assembly of this shield creates a positively charged surface. Microbes (bacteria, mold, mildew, etc.) are all negatively charged.
When Goldshield is applied to a surface it doesn’t just kill what’s on the surface but it also attracts new and airborne microbes like a strong magnet to the Goldshield nano-assembly and they are impaled, electrocuted and broken down to such an extent that no part of the microbe remains viable.
The last great detail is that as a biostatic layer, Goldshield also acts like strong double sided tape making it impossible for you to rub microbes off a treated surface onto your hands, recirculate them into the air, or to wipe the Goldshield off the surface with your next general cleaning.
This protection can last up to 14 days per application when used as directed.
SURFACES: Wood, laminate, vinyl, carpeting, ceramics, glazed porcelain, tile, marble and synthetic marble, metals and stainless steel, textiles and upholstery, concrete, formica, brick, glass, fiberglass, plastic, air filters, and PVC.
TEXTILES: Acetates, acrylics, cotton, linen, Lycra, nylon, orlon, polyester, polyethylene, polyolefins, polypropylene, rayon, silk, spandex, vinyl, and wool.
YES
Goldshield bonds and protects best to a clean and completely dry surface or textile.
NO
We are proud partners with several manufactures who product top-quality atomisers and have done rigorous testing with Goldshield products specifically to prove their droplet size does not jeopardize the efficacy and protection that is core to Goldshield products.
NO
However if you are using a commercial spray applicator we do recommend eye protection and a simple face mask so as to avoid contact with any microbes that become airborne during the application process.
The active ingredient is 3 trihydroxysilylpropyldimethyloctadecyl ammonium chloride which provides a durable, persistent, self-sanitising action.
The product has been classed as having a toxicity rating of 4, which is the most benign classification, requiring only a precautionary statement: “Keep Out of Reach of Children”.
Although this is a common problem for other antimicrobial surface providers, Goldshield scientists eliminated that issue for our formula years ago. However, if you apply too much product on glass or if you apply too frequently (for example, daily) it may leave a slight whitish film that can be easily removed with warm water and a microfiber cloth or commercial window cleaners for glass.
Our products are water-based rather than methanol-based which is a type of alcohol and surface penetration is massively improved during the bonding process using our patented, water-based formula.
We are not the only providers of residually protecting antimicrobial products but, uniquely, we are the only one who’s products are fully stabilized with water.
The science is so sound that Goldshield was awarded a separate patent for these specific details.
Decades ago a Dow Chemical patent expired covering a formula for a residually protecting antimicrobial. A handful of companies chose to begin manufacturing and selling this product at that time. The scientists/founders at Goldshield were among them. However, whereas the other companies chose to continue with using the now “old technology”, Goldshield scientists knew then that even the smallest amount of methanol could be corrosive with time, harmful if inhaled, flammable and combustible.
By joining forces with top scientists at Emory University, Heads of Medicine from major hospitals, and even a former Dean of Harvard Medical School to solve this problem not only did we eliminate the methanol component from the formula, but we also created an even more effective formula with more effective surface penetration – all by harnessing the power of water.
Since then, our team of scientists have been awarded 5 patents, have a several patents pending, and continue to make incredible discoveries in the world of residual antimicrobials that are sure to lead to many more safe yet powerful products for businesses, hospitals, schools, and homes and everywhere in between.
YES
Goldshield Laundry Protector will eliminate and continuously protect against odour-causing bacteria and fungi such as mold and mildew when used as directed.
It also is effective at removing and preventing the odour, discoloration and staining that can accompany mold and mildew.
Goldshield has a completely different killing functionality than traditional disinfectants. Most disinfectants, such as bleach or quaternary ammonium compounds encapsulate organism releasing their toxic chemicals into the organism, taking 3-10 minutes to kill and denature proteins.
Goldshield has a long carbon chain, like a spike, that releases an ionic charge that destroys the cell structure, while its chemistry denatures proteins, killing the organism on contact. This dual functionality is unique to Goldshield.
Goldshield also forms a strong chemical bond to a surface, and will not leach off or become mobile.
Disinfectants, including bleach, leave trace amounts of organics on surfaces posing respiratory risks. Goldshield will not.
Even when Goldshield is on one’s skin it attaches to the skin cells through the carbohydrates and will remain durable until the cells are naturally sloughed off or effective washed with soap and water.
Unlike alcohol, which actually penetrates one’s cells and gets into blood streams, Goldshield remains like a lattice covering of protection.
YES
There are over 65 evidence-based studies and more on-going. 4 are peer reviewed and have been published in scientific journal such as the prestigious American Journal of Infection Control
YES
USA 9,089,138
PHYSICLEAN
There are two models – the basic model and the pro model. The price depends on the size of the order and the client’s characteristics.
The devices were constructed and designed in a way that ensures minimal maintenance requirements and which integrates easily into the activity of the different departments
Beyond the enclosed specifications, the basic model succeeds in preventing infected aerosol droplets from entering the sewage system and from there, to the public domain.
In addition to total separation from the sewage system, the pro model also prevents the growth and spread of biofilms, performs a high-pressure water internal rinse of the apparatus 3 times a day while preserving cleanliness and a water flow that is free of any blockages.
They can be ordered for the kitchen or bathroom sink.
The existing siphon must be dissembled first after which the sink should then be disinfected, and the device installed according to instructional manual of the relevant device.
Installation of the basic model is similar to a regular siphon and takes 10 minutes. The pro model takes a further 10 minutes.
Saniswiss
To request a demonstration of our Saniswiss products, you can call us directly on +41 22 718 75 75 or write to us at info@saniswiss.com and make your request.
Our professionals will offer to meet you to present our product ranges.
NO
The use of the AHP controller does not require any prior measures to carry out automatic disinfection.
The dry fog generated by the automaton will not damage electronic equipment (computer, tablet, etc.) or material sensitive to humidity (paper, cardboard, etc.)
NO
The operator and all other people must be outside the room during automatic disinfection. For any questions relating to automatic disinfection with the aHP automatic machine, you must refer to the safety data sheet as well as the instructions for use.
STERIS (VHP)
Vaprox Hydrogen Peroxide Sterilant comes with a package label, package insert and certificate of analysis. A material safety data sheet (MSDS) is available 24/7 at www.sterislifesciences.com.
Vaprox Hydrogen Peroxide Sterilant can be used in the following sealed enclosure applications in manufacturing, laboratory or production settings:
• Room Decontamination
• Facility Decontamination
• Isolators
• Material Airlocks
• Instrument Manufacturing
• Equipment
• Pass-Through Chambers
• RABS / cRABS
• Biological Safety Cabinets
• Food Processing Equipment & Containers
STERIS Life Sciences Service offers a suite of services for the Customer including the following:
• Biodecontamination Services
• Preventative maintenance programs
• OEM replacement parts
• Calibration
• IQ/OQ
• Cycle development
UV222 Medico
NO
Installation of UV222 is always carried out by an authorised installer.
Effect
The UV222 lamp inactivates up to 99.9% of all viruses (including SARS-CoV-2), bacteria, and other pathogenic microorganisms in the air and on surfaces.
Depending on the specific setup, the lamp can inactivate viruses (including SARS-CoV-2), bacteria, and other pathogenic microorganisms within a radius of several metres.
Inactivated viruses (including SARS-CoV-2), bacteria, and other pathogenic micro-organisms are not capable of infecting humans and can therefore neither cause nor spread disease.
It depends on the distance between the lamp and the area you want to disinfect.
In many cases it will take less than two minutes to disinfect an area. In other cases, a handful of seconds.
Keep in mind that the area can be occupied while being disinfected, as the lamp's Far UV-C light of 222 nm is not harmful to humans.
NO
UV222 is equipped with an on off setting. After turning on the lamp, the lamp itself regulates when it should disinfect the selected area.
UV Medico’s Far UV-C lamps automatically emit the harmless doses of disinfectant Far UV-C light, and it do so in a range that the installer has judged to be the most effective in terms of your setup and needs.
Safety
NO
The Far UV-C light emitted by the UV222 lamp is not harmful to humans. Far UV-C light has a wavelength of 222 nanometres (nm). This wavelength is not harmful to living tissue – including human skin – or the eyes. In addition, UV Medico’s Far UV-C lamp is equipped with a unique and patented safety filter technology, which allows the lamp to be used in rooms and areas occupied by people without any risk or danger.
NO
Both the European Union’s directive and the Danish Working Environment Authority's legal text regarding limit values for optical radiation cover all people, regardless of age.
They are also included in the guidelines of the international trade unions ICNIRP ( The International Commission on Non-Ionizing Radiation Protection ) and ACGIH ( The American Conference of Governmental Industrial Hygienists ).
NO
UV222 has been tested on animals, and the doses of Far UV-C light emitted by the lamp are not harmful to them.
NO
UV Medico’s Far UV-C lamp does not contain mercury.
UV Medico’s Far UV-C lamp is equipped with a unique and patented safety filter technology, Care222® from Ushio Inc., which blocks even the smallest doses of harmful UV-C light from being emitted.
Other lamps that use Far UV-C light at 222 nm for disinfection, emit small doses of harmful secondary emissions other than 222 nm.
The UV222 lamp's unique safety filter technology blocks all harmful secondary light from being emitted. That is why UV222™ is the first harmless lamp of its kind on the market.
NO
UV222 is always installed by an authorised UV Medico installer. Once the lamp is programmed and ready for use, it can only emit Far UV-C light of 222 nm in doses that are not harmful to humans.
After the lamp is installed, it is not possible for you to accidentally adjust or change the configuration of the lamp.
If the lamp’s configuration needs to be updated due to e.g., changes on the room’s layout or occupancy times, an authorised UV Medico technician should be called to apply the necessary changes.
Comfort
NO
Far UV-C light is invisible to the human eye.
NO
You can actually touch the lamp without experiencing any discomfort.
UV Medico consists of researchers from Aarhus University and experienced figures from the lighting industry. You can read more about UV Medico and the team behind the company here.
In addition, UV Medico participates in research projects on Far UV-C light and the safe use of Far UV-C light in collaboration with Aarhus University.